16
2024
-
07
What are the efficient working factors of glass edging machine?
What are the efficient working factors of glass edging machine?
1. For all newly purchased edge grinders, please be sure to read the instruction manual before use, understand the transmission principle of the machine, the functions of various handles, handwheels, electronic buttons, water and air regulating valves, and master the knowledge of machine maintenance before operating the machine.
2. The quality of the grinding head of the glass edge grinder has a significant impact on the grinding quality of the glass. The position and movement clearance of the grinding head have been adjusted before leaving the factory, except for the advance and retreat of the grinding head during use. The rest should generally not be moved to avoid affecting the grinding quality. In addition, the backward position of the grinding head should not be too large, otherwise it is easy to damage the waterproof sleeve, cause water leakage, and burn out the motor.
3. Whether the cooling is sufficient also has a significant impact on the grinding effect. It is necessary to regularly check whether the cooling pipeline is blocked, especially the pipeline of the straight edge grinder is easily blocked by bristles. And it is not easy to detect after blockage, which will cause insufficient cooling and affect the quality of edge grinding.
4. The infinitely variable transmission used in the glass edging machine must be in the open state when adjusting the speed. Otherwise, it is easy to damage the continuously variable transmission of the edging machine.
Everything has been prepared in advance, and there may be other factors as well:
Manufacturing (process) factors, although the design is correct, due to the inability of process manufacturing conditions to meet design requirements, various equipment failures occur, such as cracks during forging, lack of penetration during welding, looseness and slag inclusion caused by cold and hot cracks in casting. The dimensional tolerances and surface roughness of mechanical processing are not suitable, and there are defects in heat treatment processes such as quenching cracking, temper embrittlement, structural defects in the hardened surface layer, insufficient hardness, thin hardened layer, and precision machining grinding cracks.
glass edging machine
Cleaning Methods for Art Glass
2025-11-28
Application of spodumene in glass fiber
2025-11-21
Sinoy Mirror, Inc.
Tel: 0086 532 80932020/2021/2050/2008
Office: 27F WUKUANG BUILDING,NO.32 HONGKONG MIDDLE ROAD QINGDAO
Factory: North-end of QiXing Road, Puji Town, Jiaozhou, Qingdao, China
E-mail: sales@sinoy.com bai@sinoy.cn
CUSTOMER MESSAGE
Copyright © 2024 Sinoy Mirror, Inc. SEO Business license
