18
2025
-
07
The difference between a tempered mirror and a normal mirror.
1. Manufacturing process
Ordinary mirror:
Made of silver (or aluminum) coating and back paint protective layer on the surface of float glass, without special strengthening treatment.
Tempered mirror:
First, make it into a regular mirror, and then perform physical or chemical tempering treatment (common physical method: high temperature heating followed by rapid cooling). The tempering process forms a strong compressive stress layer on the surface of the glass and a tensile stress layer inside.
2. Security (the core difference)
Ordinary mirror:
Fragile and dangerous! When shattered, it forms sharp and sharp glass shards, which are highly susceptible to cutting and injuring people.
Tempered mirror:
Safety glass! Compliant with safety standards (such as GB 15763.2). When shattered, it forms honeycomb shaped obtuse angled small particles (similar to car glass) with rounded edges, greatly reducing the risk of cuts.

3. Strength
Ordinary mirror:
Low impact and bending strength, prone to breakage due to collisions and sudden temperature changes.
Tempered mirror:
3-5 times higher intensity:
Strong impact resistance (such as heavy object impact, wind pressure)
High flexural strength (not easily deformed)
Good temperature resistance (able to withstand temperature differences of over 200 ° C)
4. Deformation issue
Ordinary mirror:
High flatness and almost no deformation in imaging (high-quality float glass substrate).
Tempered mirror:
The tempering process may introduce slight optical distortions (wave patterns, Hasselblad effects).
⚠️ High end products can be well controlled, but it is difficult to have no deformation at all. Attention should be paid to scenes that require high image accuracy.

5. Processing characteristics
Ordinary mirror:
Can be cut/punched later: During installation, it can be cut according to the size on site.
Tempered mirror:
Cannot undergo secondary processing! All cutting, edging, and punching must be completed before tempering. After tempering, it will directly burst into particles during processing.
6. Self explosion risk
Ordinary mirror:
There is no self explosion phenomenon, and the rupture is mostly caused by external forces.
Tempered mirror:
There is a very low probability of self explosion (about 3 ‰), caused by the expansion of internal nickel sulfide impurities or uneven stress. Explosion proof film is usually used to reduce the risk of sputtering.

7. Price and weight
Price:
Tempered mirrors are about 30% -50% more expensive than ordinary mirrors of the same thickness (due to the complexity of the process).
Weight:
When the thickness of the two is the same, the weight is similar (tempering does not change the thickness), but tempered mirrors are often made thicker to enhance strength.
Cleaning Methods for Art Glass
2025-11-28
Application of spodumene in glass fiber
2025-11-21
Sinoy Mirror, Inc.
Tel: 0086 532 80932020/2021/2050/2008
Office: 27F WUKUANG BUILDING,NO.32 HONGKONG MIDDLE ROAD QINGDAO
Factory: North-end of QiXing Road, Puji Town, Jiaozhou, Qingdao, China
E-mail: sales@sinoy.com bai@sinoy.cn
CUSTOMER MESSAGE
Copyright © 2024 Sinoy Mirror, Inc. SEO Business license
