Mirror installation standards for dance classrooms
The mirror in the dance studio is generally 3m high and 3.5m wide. There are the following requirements: 1. Height requirements: The specific height should be determined according to the height of the dance room, generally landing on the bottom, leaving 0.5m above. 2. Area requirements: the area should be large enough, the height should be at least 30cm higher than the height of the person, and the width should be as wide as the classroom width. 3. Installation requirements: The installation must be firm and reliable, and there must be no shock or shaking. 4. Protection requirements: There should be protection in front of the mirror to prevent students from impacting, and a clothing box can be placed in front of the mirror. 1. The dance studio is a place for physical training and dance rehearsals in art teaching. It can also be used for the opening of gymnasiums and other projects in spare time. The dance studio should create an artistic world for students to give people a beautiful feeling. It contains supporting facilities such as dance studios, dressing rooms, and toilets. 2. The dance room needs to be equipped with mirrors, floors, audio televisions and other teaching application equipment, and the environmental requirements should not be less than 280 square meters. Fluorescent lighting should be used, and curtains should be installed on the windows to avoid sunlight. Exhaust fans should be used for forced ventilation, and air conditioners and electric fans should be installed to ensure that the indoor temperature should not exceed 30°C. The floor is covered with solid wood floor, and the floor of the dance studio is covered with solid wood floor or composite floor, or equipped with plastic cushion according to the classroom area 3. The design of the dance room should take into account the functional requirements of teaching and rehearsal, and a full-length mirror with a height not less than the indoor height should be provided. The remaining three inner walls should be provided with handles with a height of no less than 12 meters, and the distance between the handles and the wall should not be less than 30 cm. The equipment cabinet size requires a unified structure, reasonable and practical, and beautiful. The materials meet the environmental protection requirements, the number of equipment cabinets meets all equipment storage, and corresponding anti-theft and fire safety facilities should be provided. 4. On the horizontal wall perpendicular to the daylighting window, there should be two pairs of full-length camera mirrors with a height of not less than 2.1m and a mirror base, and a handle with a height of not less than 1.1m that can be lifted to 3m should be installed on the wall. , The distance between the pole and the wall is not less than 400mm. Written by Angus,from Sinoy Mirror Inc
11-05
2020
How to choose a bathroom mirror if you want to improve the appearance of the bathroom
Bathroom mirrors are an indispensable accessory in the bathroom, but because the bathroom is highly humid, the choice of bathroom mirrors has different standards and requirements from other mirrors. Today, I will give you a brief introduction to the precautions for the purchase and installation of bathroom mirrors. Choose from style and appearance First of all, from the perspective of style, there are generally two types of mirrors, round and square. Different shapes of mirrors should be selected according to different styles. For example, round mirrors tend to be European and American styles, while square mirrors tend to be Chinese. When purchasing, you should observe the mirror from multiple angles from the front, side, and back. Generally, when you look at the mirror, you only pay attention to the direct image of yourself in the mirror, instead of paying special attention to the straight objects in the mirror. Move your line of sight slightly, if the straight object is not bent or deformed, this is a good quality mirror. Waterproof, anti-rust and anti-fog functions, one can not be less Ordinary mirrors will become dim if they are placed in a relatively humid place for a long time, and may even rust and fall off. So we need to pay attention to the waterproof and rust-proof ability of the mirror. You can usually watch the portrait in the mirror at close range. You can move your sight up and down or left and right to see if the object is bent or deformed. In addition, there will be a lot of mist in the bathroom after the shower, causing the mirror surface to become blurred. Custom-made anti-fog film is generally used in the market, which is a translucent polyester film that can generate heat after power on. Put it on the back of the bath mirror before use, as flat as possible for easy use. Storage function is the key Bathrooms are generally small in space, so while considering the beauty, you also need to consider its storage function. According to the experience of people who have renovated, a mirror with a little storage function can make up for the lack of bathroom space. In addition, observe and touch the product by hand. Check whether the appearance of the product is deformed or discolored, whether the straight rod is straight, whether the table surface is flat, whether the color is bright, whether the electroplating surface and paint surface of the product have defects and blisters, and whether the welding place is smooth and firm. Installation is also a university question, 160-165cm above the ground is most suitable When hanging the mirror, pay attention to the height. Generally, it is better to keep the middle of the mirror 160-165cm above the ground. The mirror in the bathroom can be framed. If it is not framed, it needs to be sealed and waterproof. When installing the mirror front lamp, pay attention to prevent glare. It is recommended to install a lampshade or choose a lamp with a frosted glass surface. In addition to the ordinary mirror, a stretchable magnifying glass is installed above the washbasin. Written by Angus,from Sinoy Mirror Inc
11-05
2020
Gym mirrors are a type of mirror installed in public places such as gyms. They generally occupy a large wall area and can surround the gym in all directions. Gym mirrors are mainly provided to bodybuilders, so that they can observe their own physical condition and the standard of movement during exercise. This article mainly introduces gym mirror size, gym mirror installation method, gym mirror manufacturer and gym mirror price. Gym mirror size Gym mirrors are generally wall-mounted mirrors installed on a solid wall. The height is generally about 2 to 3 meters from the ground, and the width is also 2 to 3 meters. This is just a general data concept, and the main thing is to cover the walls of the overall gym. The special point of the gym mirror is that it has a large area and the height should exceed 30 cm of the person's height. Because it is a wall-mounted mirror, it is necessary to pay attention to its firmness when installing it to prevent fitness people from being injured. How to install gym mirror The following is an introduction to the specific installation method of the gym mirror, which can be used as a reference for consumers: (1) First of all, it is necessary to hire professional personnel to measure the size of the wall where the mirror is laid in the gym and customize it. When measuring the wall, it is necessary to fully consider the bearing capacity of the wall, and the wall cannot be damaged. Generally speaking, mirrors used in gyms are more consistent, so high-quality materials need to be selected. (2) When installing, if you need to use a lamp, you need to keep a certain distance from the mirror, otherwise it will easily reflect strong light from the mirror. It is best for the mirror to have a certain degree of anti-fog performance, so that it is not easy to get water droplets. (3) Mirrors with borders are generally not easy to cause scratches, nor will the user's clothing be broken. After fully considering these, install the purchased mirror on the wall. Written by Angus,from Sinoy Mirror Inc
11-05
2020
Mirrors on the market usually have three different back coatings: Mercury, sterling silver and copper. Common mirrors have mottling after sizing for a period of time. In this case, most users use acid glass glue, and acid glass glue usually occurs with the above materials. The reaction caused the speckles on the mirror surface, so we emphasized that neutral glue should be used, and the neutral glue will be classified according to the purpose. If the wrong glue is selected for the mirror with the copper base, the glue will slightly corrode the copper material, and the construction will take a while On the rear mirror, you can see that there are corroded watermarks on the glue on the back. This phenomenon will not appear if the special glue for the champion mirror. The above are the improper selection of materials due to the diversity of substrates. Therefore, it is recommended that users use glue before Do a compatibility test to see if the glue is compatible with the material, and then use the appropriate glass glue product to avoid unnecessary losses. The special neutral transparent weather-resistant adhesive is specially designed for mirrors, paint sprayed and coated glass, handicrafts, metals, glass steel, wood panels and other materials with spray coating. It is a one-component, room temperature curing, quick-drying, dealcohol type , Low modulus silicone sealant. This product is easy to use and can be extruded at any time at room temperature. It quickly reacts with moisture in the air and has a fast curing speed, forming a tough elastic colloid after curing. Due to its special ingredients, when this product is used to bond the side with spray coating, it will not corrode and affect its bonding performance and product appearance. This product has excellent bonding properties to a variety of substrates such as glass, coated glass, aluminum, ceramics, ceramic tiles, steel, wood, and plastics, air tightness, water tightness, vibration resistance, UV resistance, aging resistance and resistance High and low temperature (-50℃-200℃) and other functions. Product Usage: *It is suitable for bonding mirror blocks, glass with spray coating (film) and various paving materials in the construction industry; *Bonding of mirror glass, paint sprayed and coated glass, crystal and metal jewelry in the handicraft industry; *Bonding and sealing of various types of mirrors in the mirror industry; *Bonding and sealing of coated glass for lighting equipment and lighting fixtures; *Bonding and sealing of paint sprayed plates, metals, glass steel, etc.; *Adhesive sealing of the glass surface of glass display cabinets, exhibition centers, libraries, museums, etc. Written by Olivia Wang,from Sinoy Mirror Inc
11-05
2020
A simple case for how to make a mirro
Cleaning glass After cutting the glass according to the specifications, first rinse the front and back sides with tap water, and then apply the iron red powder with water on the side to be plated, wipe off the iron red powder after drying, and rinse with water. Then wipe the surface of the glass to be plated with a small amount of stannous chloride solution. After washing, rinse the remaining stannous chloride with water. Finally, rinse the glass with clean water (preferably distilled water). silver Place the cleaned glass flat on a horizontal wooden frame or wooden strip, take one part of silver liquid and one part of reducing liquid, stir and pour it on. The liquid medicine should not run off. About 2 deciliters per square meter. After it gradually reflects the silver mirror on the glass, pour out the excess liquid medicine, rinse with water, and pour ten thousandths of the gelatin to dry. After it dries, apply a layer of iron red primer or other anti-rust paint on it to become a mirror. Liquid formula Silver liquid: 2500 ml of distilled water (cold water is also available), 25 grams of silver nitrate, 18.5 milliliters of ammonia (until it is clarified by chemical reaction). Reducing liquid: 2500 ml of distilled water (cold water is also acceptable), 25 g of potassium sodium tartrate, the upper liquid is heated to clarify, and then 0.5% silver nitrate is added, and the liquid medicine is kept filtered for use. Gelatin liquid: 1000ml water, 10g gelatin, steamed in water. Add proper amount of banana water solution to iron red primer. Written by Olivia Wang,from Sinoy Mirror Inc
11-05
2020
Don't neglect the maintenance of bathroom mirrors! How to clean and maintain?
The mirror is a very important decoration in the bathroom. It not only allows people to tidy up their appearance, but also can well decorate the bathroom and enhance the atmosphere of the bathroom. Bathroom mirrors need to experience a humid and dark environment, so they need to be cleaned and maintained regularly after long use. Here is an introduction to the cleaning and maintenance of bathroom mirrors. Bathroom mirror cleaning and maintenance: Don't ignore bathroom mirror maintenance! How to clean and maintain? 1. Mirror cleaning If the mirror surface is stained or not bright, you can spray it with glass cleaner and wipe it with newspaper. 2. Mirror anti-fog Before bathing, apply soap to the mirror surface and wipe it with a dry cloth to form a layer of soap film on the mirror surface to prevent blurring of the mirror surface; or use a dry cloth dipped in a proper amount of detergent to apply to the mirror surface, or use astringent lotion Or detergent, which can effectively prevent water vapor from condensing on the mirror surface, and can play a good anti-fog effect. 3. Attention to daily maintenance of mirror Do not touch the mirror with wet hands, and do not wipe the mirror with a damp cloth to avoid adding moisture. Wipe the mirror surface with a soft dry cloth or cotton to prevent the mirror surface from being rubbed. You can wipe it with a soft cloth or emery cloth dipped in some kerosene or wax, or wipe the mirror and frame with a rag dipped in milk to make it clear and bright. Fourth, the frame cleaning and maintenance Use a soft cloth or feather to dust off the surface of the frame. Or wipe the surface of the frame with a clean soft damp cloth and gently wipe; do not use any glass cleaner or other solvents to contact and scrub the frame. The cleaning and maintenance of bathroom mirrors cannot be ignored, otherwise it is easy to breed bacteria and affect the use. The above is an introduction to the cleaning and maintenance of bathroom mirrors. I hope this article is helpful to you. Written by Olivia Wang,from Sinoy Mirror Inc
11-05
2020
The mirror cleaned with shaving cream is so bright and dazzling
The mirror in the house is always dirty, but it is not cleaned up. Every time it is wiped, it feels as if there is a protective film on it. It is always not so bright, so many people also I have thought of many ways to clean the mirror, but they have no good results. And if there is a man in the house, then you will find that using shaving cream to clean the mirror will become very convenient, and the effect is very good, because shaving cream is a very powerful item, and its chemical reaction is also very high. Strong, especially its foam is very much. So if you rub it on the mirror, you will see a lot of bubbles appear on the mirror, and in this way, you can find that these bubbles can integrate all the impurities on the mirror. After cleaning up all the impurities, use a wet paper towel to remove the foam. Then you will find that the mirror becomes very bright and very dazzling. This will become very convenient, and everyone They all know that they are actually at home. This situation often occurs, and through such a small experiment, it is also found that if the glass in the home is damaged, the same method is used to treat it, and the effect is very good But it’s just that it may waste a lot of razors, so you can choose those that are very cheap when you buy them. After all, they are not painted on your face, so there is no need to worry about chemical reactions or allergies. Wait. Therefore, it must be able to play a very good role in cleaning the home, and for most people, after seeing that it can bring so much convenience to people, everyone is also very excited, because the condition of For people, they are also very clean. Using a razor to clean the mirror is a better effect. And it can also make it easier for people to look in the mirror at ordinary times. You can see your dress and mirror clearly. If it is very clean, it will make people feel better. And most people may also see such a problem, after all, in people's lives. If you want to make your home cleaner, you need to try all kinds of ways to clean your own room. After all, this is the only way to make the place where you live becomes very clean. Sometimes, if you clean If it is not in time, it may also bring some unsatisfactory results. Therefore, the most important thing in home hygiene is not whether people will clean, but what the cleaning methods people take, because sometimes it is simple and simple. One thing alone makes people do very complicated, just because they choose the wrong method.
11-05
2020
Common building glass on the market
Different architectural parts will use different architectural glass. Especially in the application of external windows, because of the transparent lighting and heat resistance of the glass to keep warm. In different occasions, glass with different functions is also needed. Tempered glass, insulating glass, heat-reflective glass and other glass with various functions came into being. Today, SINOY editor will take you to learn about several commonly used architectural glass. 1. Tempered glass Tempered glass is made by heating float glass to near the softening point in a tempering furnace, and then rapidly and uniformly cooling it, forming uniform compressive stress on its surface, increasing its mechanical strength, and effectively improving the wind pressure and impact resistance of the glass Performance, improve the thermal shock resistance of glass. Tempered glass is widely used in places that require relatively high mechanical strength and safety. Such as glass doors and windows, building curtain walls, glass furniture, indoor partitions, elevators, furniture, etc. Performance characteristics of tempered glass 1) Safety: When broken, it splits into small obtuse-angle particles similar to honeycombs, which hardly cause serious harm to the human body. When ordinary glass is broken, it is a sharp large piece of fragments, which is easy to cause serious harm to the human body. 2) High strength: 4-5 times stronger than ordinary glass of the same thickness. 3) Stable heat resistance: With good thermal stability, the temperature that can withstand is about 3 times that of ordinary glass of the same thickness, and it can withstand temperature changes of 200°C. Therefore, it can play a short-term fire prevention effect in the event of a fire. 4) Large interference: 3-4 times larger than ordinary glass of the same thickness. When tempered glass is loaded, its maximum tensile stress is not located on the surface of the glass like ordinary glass, but at the center of the tempered glass plate. 2 Laminated glass Laminated glass is a composite glass made by sandwiching a tough polyvinyl butyral film (PVB) between two or more pieces of glass, which is made through high temperature and high pressure. Because the toughness of the PVB film is very good, when the laminated glass is violently impacted and broken by an external force, the film layer will absorb a large amount of punching skills and make it attenuate rapidly. Because the laminated glass is difficult to be broken down, even if the laminated glass is broken, the glass The fragments basically adhere to the film, keeping the fragments on the entire laminated glass from falling off, so it becomes the real safety glass. Laminated glass made of transparent PVB film, its appearance and installation method are basically the same as ordinary glass, and it is durable. It is widely used in building lighting roofs, canopies, high-end curtain walls, doors and windows, shop windows, furniture, elevators, etc. Performance characteristics of laminated glass 1) Safety: The laminated glass installed on the building is subject to any external impact, even if the glass is broken, it can be kept in the original frame completely, and has a certain function of sheltering from wind and rain. 2) The noise-reducing PVB film has an obstructive effect on sound waves, thereby reducing noise and reducing noise interference at work or home. 3) Anti-ultraviolet rays: Great blocking effect on ultraviolet rays in sunlight (up to 99% or more) and avoid ultraviolet radiation. Therefore, it can protect valuable indoor homes or artworks from fading caused by ultraviolet rays. 4) Bulletproof and explosion-proof: the use of multilayer laminated glass can produce various levels of bulletproof and explosion-proof glass. 5) Security: Because glass cutters cannot be used to effectively cut the installed laminated glass, and the use of other tools to penetrate the laminated glass takes a long time and the sound is loud, it is difficult and easy to enter the room by cutting or breaking the laminated glass. It is found that it has a strong resistance to vicious destruction, theft and violence. 6) Protection against hurricanes and earthquakes: Due to the high toughness and strong adhesion of laminated glass, even if the laminated glass is broken, the fragments will still remain in place. It is more suitable for use in hurricane and earthquake areas. 3 Insulating glass Insulating glass is a glass product made of two or more pieces of glass separated by a certain width of space with an aluminum frame filled with molecular sieve adsorbent, bonded and sealed with butyl glue, and then sealed with silicone glue or structural glue. Has good sound insulation, heat insulation, heat preservation, anti-condensation and other effects. Insulating glass is widely used in various building curtain walls, doors and windows, indoor partitions or freezers, etc. Thickness of insulating gl
10-13
2020
Sinoy Mirror, Inc.
Tel: 0086 532 80932020/2021/2050/2008
Office: 27F WUKUANG BUILDING,NO.32 HONGKONG MIDDLE ROAD QINGDAO
Factory: North-end of QiXing Road, Puji Town, Jiaozhou, Qingdao, China
E-mail: sales@sinoy.com bai@sinoy.cn
CUSTOMER MESSAGE
Copyright © 2024 Sinoy Mirror, Inc. SEO Business license
